Rubber tire stainless steel casters high temperature casters: forklift tire loads and driving conditions, a suitable tire pressure, tire radial deformation increases when the tire pressure lower than the standard driving on both sides of the excessive deflection so that both sides of the tread ground, the tire side wall pressure, sidewall outer wall tension, the tire body cord have a greater deformation and alternating stress. Cyclical compressive deformation, fatigue damage will come back to the speed cord, so that the relative sliding between the tire ply tire with the ground to increase, the friction heat generated by increased tire temperature rose sharply, the tensile strength of rubber to reduce cord loose and partial delamination, the case of obstacles to be affected when a puncture. Uneven tread pressure, the tire shoulder some serious wear and tear, resulting in the "bridge effect" tread jagged or wavy. The tire tread recess easy embedding nails and stones of the road, causing mechanical damage. Carcass rolling resistance increase, the increase in fuel consumption. The tests showed that when the tire pressure is lower than the standard value of 20% -25%, fuel consumption and a corresponding increase of 20%. , So tread when the tire pressure higher than the standard value of travel to the central ground, the tire and road contact area decreases, the load per unit area increased, exacerbated by the middle of the tread wear. Tire cord is over-done, the carcass cord stress increases, the cord fatigue speed up the process, causing the cord to pull off, resulting in a puncture tire early. 

 : Under a certain load and tire pressure, speed increases, the tire deformation frequency, the vibration of the carcass and the tire circumferential and lateral distortion (the formation of stationary waves) increases, the heat generated by the internal friction of the unit time increase tire performance degradation, even ply rupture and the tread peeling off, and accelerated tire wear and damage. 

 High temperature of rubber tire stainless steel casters casters three: in certain tire pressure, tire overloading so that the deflection increases, cord and cord stress increases, and could easily lead to the sidewall parts of the cord to break loose and ply delamination, fetal The body cord will be more than the design allowable stress and tire contact pressure, the heat generated by increased carcass temperature, decreased carrying capacity. Generated due to the tire shoulder and the ground contact wear and tear, especially in the face of obstacles, even if a small stone, can also cause fetal crown blasting. Practice has proved that the case of traveling on the turn and uneven pavement, when the tire load more than 20%, its mileage will be reduced 35%; more than 50%, reduced by 59%; more than one times, reduced by 80% or more. 

 : Road conditions, tire life is also great, it affects the dynamic load to the tire friction with the ground and tires are rubber tire stainless steel casters high temperature Casters